Compressed air purity is crucial for many industry sectors, such as medical, research and biotechnology.
The new S-Series of oil-free scroll compressors from CompAir does not use any oil anywhere in the compressor and has been certified ISO 8573-1 Class 0 and silicone free, which represents the highest air quality level possible.
In addition to the fulfilment of legal requirements, the oil-free scroll technology reduces the costs of ownership by avoiding oil filter replacements, oil condensate treatment and energy to combat the pressure loss caused by filtration.
- 100% oil-free design
- High reliability
- Continuous operation, 100% duty cycle
- Energy efficient
- Low vibration and sound levels
- Compact design
- Low maintenance due to less moving parts
Scroll compression explained
-
- An orbiting (rotating) scroll and fixed scroll housing are mated to create the compression chambers.
- The continual movement of the orbiting scroll moves atmospheric air from the intake toward the center, compressing the air into progressively smaller areas.
- The compressed air is directed to the center discharge port of the compressor
- Discharge pressure is accomplished during multiple stages of compression, resulting in a continuous intake suction and discharge.
The S-Series from CompAir is available with different controller options. The Simplex versions can be either equipped with the basic relay panel or optionally with the Deluxe HMI electronic controller.
- NEMA 1, UL508A Labeled Panel
- Magnetic Contactor with Overload Protection
- 115V Control Circuit Transformer with Fusing
- Door Mounted TOA Switch
- Green Power On Light
- Emergency Stop
- Reset Button
- Run Time Meter
- Pressure Gauge
The optional Deluxe HMI control from CompAir has easy to use navigation and friendly graphics that deliver interactive and intuitive information at your fingertips.
With a built in integral webserver, via ModBus TCP Ethernet connection, these controllers provide visibility to the scroll compressor system from any computer or mobile device with internet connection.
Deluxe HMI
- 3.5” Full Color Touch Screen
- PLC Controlled
- Lead/Lag Control with Forced Alternation
- System Capacity and Operation Trending
- 26 Language Options
- 24VDC Power Supply with Fusing
- System Run Time Meter
- Alarm/Fault Log
- System Discharge Pressure
- Pump Discharge Temperature
- System Maintenance Timers
- Integral Webserver
- Modbus TCP Interface over Ethernet
CompAir S-Series – Technical Data
Simplex
Model | Nominal Pressure
[bar g]
|
Drive Motor
[kW]
|
FAD at 8 bar g *
[m3/hr]
|
FAD at 10 bar g *
[m3/hr]
|
Noise Level **
[dB(A)]
|
Dimensions
L x W x H [mm]
|
Weight
[kg]
|
---|---|---|---|---|---|---|---|
S04 | 8 / 10 | 4 | 23.6 | 21.2 | 65 | 1168 x 686 x 711 | 315 |
S06 | 8 / 10 | 5.5 | 34.5 | 26.0 | 70 | 1168 x 762 x 711 | 352 |
S08 | 8 / 10 | 7.5 | 53.0 | 41.3 | 73 | 1168 x 762 x 711 | 367 |
Duplex
Model | Nominal Pressure
[bar g]
|
Drive Motor
[kW]
|
FAD at 8 bar g *
[m3/hr]
|
FAD at 10 bar g *
[m3/hr]
|
Noise Level **
[dB(A)]
|
Dimensions
L x W x H [mm]
|
Weight
[kg]
|
---|---|---|---|---|---|---|---|
S07D | 8 / 10 | 7 | 47.2 | 42.5 | 64 | 1420 x 864 x 1404 | 562 |
S11D | 8 / 10 | 11 | 69.0 | 52.0 | 68 | 1422 x 864 x 1397 | 599 |
S15D | 8 / 10 | 15 | 106.0 | 82.6 | 71 | 1422 x 864 x 1397 | 615 |
* Data measured and stated in accordance with ISO 1217 Edition 4, Annex C & E at the following conditions:
Air Intake Pressure 1 bar a / 14.5 psi; Air Intake Temperature 20°C / 68°F; Humidity 0% (dry)
** Measured in free field conditions in accordance with ISO 2151, tolerance ± 3dB(A)